VX-54HA Hand-Arm Vibration Accessories

VX-54HA Hand-Arm Vibration Accessories

Rion's small PV-93 and miniature PV-97C accelerometers are excellent for hand-arm vibration measurements but there remains the issue of attaching them to the tool being measured. If you hire or purchase the Rion VM-54 tri-axial vibration meter and VX-54HA hand-arm option from ANV Measurement Systems you will be offered the option of our fixing solution. Rounded and v-profiled mounting blocks are provided which can be fixed to the tool’s handle using a cable tie which is then tightened with a cable tie gun. We use the Hellermann Tyton KR series which locks the cable tie in place using a glass-fibre reinforced locking pin. The combination of two choices of block profile and the high tension afforded by the cable tie/gun system enables good coupling to be achieved with a wide variety of handle shapes.

  • Rounded and v-profile machined aluminium blocks provided
  • Small enough to be accommodated with hand on most tool handles
  • High tension and secure cable tie locking system
  • Locking system and choice of profiles enables good coupling to be achieved for a wide variety of handle shapes
  • Rion PV-93 and PV-97C Accelerometers accommodated
  • Calibration Block also provided to enable PV-93 or PV-97C and VM-54 to be calibrated using Rion VE-10